{"id":7985,"date":"2018-04-26T07:39:54","date_gmt":"2018-04-26T07:39:54","guid":{"rendered":"https:\/\/www.3dnatives.com\/en\/?p=7985"},"modified":"2018-07-01T20:06:48","modified_gmt":"2018-07-01T20:06:48","slug":"3d-printed-steel-bridge260420184","status":"publish","type":"post","link":"https:\/\/www.3dnatives.com\/en\/3d-printed-steel-bridge260420184\/","title":{"rendered":"Is the 3D printed steel bridge by MX3D finally ready?"},"content":{"rendered":"

Last September, we highlighted the progress that MX3D had made on their 3D steel bridge. Well, this month, we\u2019re back again with another update and it looks like the Dutch construction company has made even more progress than before! MX3D has recently revealed the first photos of their bridge, explaining that it would incorporate smart sensors that will monitor the construction of the structure as well as its durability.<\/p>\n

In October 2015, MX3D\u00a0 began building a steel bridge using 3D technologies: it developed a 6-axis robot that would extrude metal rods that could then be welded together, layer by layer. This process is called Wire Arc Additive Manufacturing (WAAM), which is also used by RAMLAB<\/a> to design their boat propellers.<\/p>\n

\"3D<\/a>

Photo credit: Joris Laarman Lab<\/p><\/div>\n

Smart sensors on a 3D printed steel bridge<\/h3>\n

MX3D will be working with the Cambridge Center for Smart Infrastructure and Construction (CSIC), Imperial College London and the Alan Turing Institute in the UK to install the sensors onto the 3D printed bridge. These sensors will collect data that will be used to build a second digital bridge, the “Digital Twin”, in order to better understand the state of the structure and make any necessary changes.<\/p>

\"\"<\/a><\/div>\n

The bridge had to be 3D printed directly on site: the robotic arms were intended to move with the structure. But after some unsuccessful tests and tries, MX3D decided to make it piece by piece and assemble it on site. Once completed, the bridge should be able to support pedestrians and cyclists who will cross the center of Amsterdam. The Dutch company says it has succeeded in supporting 30 people. This initiative is one that reminds us of the concrete 3D printed bridge<\/a> that can also be found in the Netherlands, although it\u2019s only reserved for cyclists.<\/p>\n

\"3D<\/a>

photo credit: Adriaan de Groot<\/p><\/div>\n

MX3D announced that the presence of sensors on their 3D printed steel bridge will provide accurate data on those who use the bridge as well as the bridges overall \u2018health\u2019. Dr. Mohammed Elshafie, describes the main features of this new system: \u201cThe sensors collect data on structural measurements including strain, displacement, and vibration and measure environmental factors such as air quality and temperature. This enables engineers to monitor the \u2018health\u2019 of the bridge in real time and observe and record how it changes throughout its lifespan. The sensor network provides a \u2018nervous system\u2019 for the bridge and creates a living laboratory for the researchers and engineers.\u201d<\/p>\n

\"3D<\/a>

The MX3D team on the 3D printed steel bridge (photo credit: Adriaan de Groot)<\/p><\/div>\n

These sensors will also ensure that the bridge can be safely crossed. Since this is the first time that we can walk on a 3D printed steel bridge in the red light district of Amsterdam, MX3D had to guarantee the long-lasting and safe nature of the structure in the city. The sensors would, therefore, make it possible to monitor and solve security problems with great precision. Could this 3D printed bridge become the safest bridge in the city? Find more information on MX3D\u2019s official website<\/a>.<\/p>\n