menu

A 3D printing method based on the use of a single drop of resin

Published on October 22, 2020 by Aysha M.

Researchers from the Chinese Academy of Sciences and MIT, claim to have developed a 3D printing technique based on photopolymerization that uses only a drop of resin to design a part. Based on the Continuous Digital Light Processing (cDLP) method, it has already proven its effectiveness through various tests conducted by researchers. The process would greatly reduce the rate of wasted material, while keeping the same characteristics of resin.

Stereolithography is one of the oldest additive manufacturing methods on the market, offering high precision and a high level of detail. However, it is still limited by the possible volume of printing, even if some manufacturers seek to innovate in this area. For example, Azul3D has developed an ultra-fast, large format SLA machine. Today, there are several light-curing processes, such as DLP, which uses a light projector instead of a laser to harden the resin. Regardless of the method used, there is usually a post-processing step to remove the uncured resin from the printed part and ensure that the machine is cleaned well. A step that adds manufacturing time and increases the resin discard rate. This excess can limit print resolution and increase costs.

drop of resin

Only one drop of resin would be needed to 3D print the desired piece.

Given this observation, the research team developed a technique that would only use a single drop of resin. Inspired by the lotus and pitcher plants that collect and sink water spheres, their method works in a dynamic similar to that of a three-phase contact line (TCL). Specifically, a drop of resin is deposited on a photopolymerization plate, with ultraviolet light continuously projected underneath. During this time, the aluminum print bed placed above the curing interface lifts off of the plate with each printed layer.

The researchers explain that the light-curing interface minimizes the amount of resin adhering to it by allowing the TCL of the projected resin drop to be removed during the printing process. They add: “Thus, only the resin needed to print the piece will adhere to the plate. We were able to manufacture a 24mm long cylindrical grid structure with 99.6% wet resin utilization efficiency“.

The team conducted several tests to demonstrate all the possibilities of this 3D printing technology with just one drop. They printed a dental CT model of the tooth, as well as molar, incisor and canine crowns. The conclusion is very positive: “Our method can transform a single drop of resin into a defined structure with high material utilization efficiency by properly adjusting the properties of the light-curing plate, which can minimize costs as well as the resin and provide a benchmark for on-demand 3D printing”. You can find more information about the project HERE.

What do you think about the newly developed 3D printing method? Let us know in a comment below or on our Facebook and Twitter pages! Sign up for our free weekly Newsletter, all the latest news in 3D printing straight to your inbox!

Share Your Thoughts

Your email address will not be published. Required fields are marked *

de_DEen_USes_ESfr_FRit_IT
Stay Updated
Every wednesday, receive a recap of the latest 3D printing news straight to your inbox.