The Pharaoh XD 30 3D printer from the Latvian company Mass Portal has 3 material extruders and prints, thanks to the integrated Delta technology, faster, quieter and with less vibration than comparable, conventional 3D printers. The XD 30 is equipped with full metal printheads and replaceable brass nozzles. Each printhead has two heating elements, enabling filaments with a temperature of up to 300°C to be efficiently and reliably print at high print speeds of up to 300 mm/s.

The linear guide ensures smooth, precise movements and enables variable slice resolutions of 0.01-0.6 mm. The Pharao XD 30 can be equipped with nozzles from 0.1 to 0.8 mm and adapted to the respective materials and printing requirements. The distance between the print head and the print bed is permanently measured by the automatic calibration system and readjusted if necessary. This way, inclinations of the print bed are compensated.

The glass pressure plate can be heated up to 120°C allowing for a very good adhesion when printing with ABS and other plastics. The enclosed space ensures a constant ambient temperature for the pressure, which minimises or completely eliminates the deformation of objects. At the same time, the printer has removable, transparent doors and side panels, which provide excellent visibility and access to printing. The supplied software can be adjusted to a wide range of materials and surfaces.