The Da Vinci 1.0 Pro is part of the XYZprinting Pro series. With its heated aluminum plate, it allows you to print a wider range of materials such as ABS or PETG with a low risk of warping.
The Da Vinci 1.0 Pro 3D printer has a minimum layer thickness of 20 microns, a maximum print speed of 120mm / s for a manufacturing volume of 200 x 200 x 200 mm. It is equipped with a WiFi or USB connection for greater connectivity. Although it uses the XYZware Pro software, the 1.0 Pro allows the use of many non-proprietary filaments, as well as less common materials such as wood. It is also compatible with other slicing software like Cura or Slic3r. The finished prints will be of a high quality, thanks to the 20 – 400 microns of layer resolution.
The Da Vinci 1.0 Pro also offers the Laser Engraving option for engraving different materials such as paper, cardboard, leather, wood and plastic – you just have to replace the print head with a laser module and load up the XYZ engraving software. The laser engraving area is 20cm x 20cm and the laser has a wavelength of 406 nm + 8 nm/-6 nm InGaN.